As an Amazon Associate I earn from qualifying purchases.
HiFiBerry #ad - Generous internal room allows HATs, Serial Hat, or heat sinks. When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables. One snap action locks the Pi board into the case; the second secures the lid, rattle free.
The highpi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case Screws not included. Installing or removing the Raspberry Pi PI4 board is astonishingly quick, simple, and secure; all without tools or assembly.
External dimensions: 97 x 66 x 41mm, Internal volume for breakout boards: 90 x 60 x 28. 8mm. Remove the pi board and the lid with one-finger-releases for each. Fits all kinds of hats - whether you’re running a plain pi4 board or modding it to the max, the highpi case has your pi covered. Supports pi poe hat, hifiberry hats, break-out boards, UPS HAT and more!. Rapid, tool-free assembly - the highpi case sets the standard for ease of use and versatility in raspberry Pi cases.
Geekworm #ad - The raspberry pi or the expansion board is not included. Packing list: 1 x acrylic case; 1 x Pack of Screws. This is protection solution for non-standard boards running boards on top of the raspberry pi, but Please note, this case only compatible with those board which are fitted with the raspberry pi hat, and please check the size of the case carefully to make sure that it will meet your need.
Compatible with raspberry pi 4 model b/ pi 3 model b+ / pi3 model b/ 2B / B+ and Pi Hat expansion board Like X706 UPS/X728 UPS.
GeeekPi #ad - Access to all ports and slots of raspberry Pi, GPIO port, including SD card slot, USB ports, HDMI port and so on. Note: raspberry pi board and Low-Profile CPU Cooler are Not Included. It not only provides good protection to your Raspberry Pi and also offering excelent heat dissipation.
HiFiBerry #ad - Equipped with an additional BNC connector. Soldering required. Supports hifiBerry DSP add-on board. A high-quality S/PDIF output. Uses the i2s sound port that connects directly to the CPU without the need for an additional USB conversion.
OONO #ad - The space between the lower cover and the upper cover is 40mm, support Raspberry Pi direct stack HAT module, or Beaglebone stack CAP module. Compared with other enclosures, or Arduino stack SHIELD module, the project is more practical and flexible.
Packing list: 2x covers, 8x m4x40mm standoffs, 16x m2. 5x6mm screws, must use m2x12mm spacers and M2x6mm screws, 4x m4x8mm screws, 8x M2.5x10mm spacers for arduino mkr module install, 4x M4x10mm spacers, but the kit not include these spacer and screws.
It can be assembled very flexibly as a semi-closed enclosure, or if you buy multiple sets, or as a two-layer bracket, it can be used as a Raspberry Pi cluster case.
innomaker #ad - Provides 2. 1vrms ground-centered outputs coupled with Film capacitor. Class-leading stereo audio dac pcm5122, sample rates up to 384-khz/32-Bit. Support playing music from a hard disk or over the network. The hifi dac hat compatible with raspberry pi 4, 3b+ with the 40-pin connector.
Connects directly to the raspberry Pi board, Zero W, no additional cables required, 3B, Zero, no soldering. For more information, please refer to our wiki（view the link on color page comes with the goods.
5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals. Comes with software, document and friendly technology support. Paired with stereo high fidelity headphone amplifier TPA6133. Absolutely perfect to support all raspberry pi music playback system, pimusicbox, max2play, Volumio, Debian, RuneAudio, Moode, OpenELEC, PiCorePlayer, like LibreElec, OSMC, Ubuntu etc.
1. HiFiBerry
#adWhite, Steel Case for HiFiBerry DAC+ RCA, Pi 4
#adHiFiBerry #ad - T is ideal for environments that need something rugged or for people that don’t like plastic. This is hifiberry's most robust case, made completely from steel. Compatibility: raspberry Pi4 and RCA Version of HiFiBerry DAC+.More information #ad
| Brand | HiFiBerry #ad |
| Manufacturer | HiFiBerry #ad |
| Height | 1.77 Inches |
| Length | 3.94 Inches |
| Width | 2.56 Inches |
More information #ad
2. HiFiBerry
#adHiFiBerry HighPi Raspberry Pi Case, Raspberry Pi4
#adThe highpi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case Screws not included. Installing or removing the Raspberry Pi PI4 board is astonishingly quick, simple, and secure; all without tools or assembly.
More information #ad
High quality abs plastic case, large internal volume for hats, or heat sinks, Vents on three sides double as fly-through cable ports, set of 4, break-out boards, Self-adhesive rubber feet included, designed and made in Canada, Matte finish hides fingerprints. External dimensions: 97 x 66 x 41mm, Internal volume for breakout boards: 90 x 60 x 28. 8mm. Remove the pi board and the lid with one-finger-releases for each. Fits all kinds of hats - whether you’re running a plain pi4 board or modding it to the max, the highpi case has your pi covered. Supports pi poe hat, hifiberry hats, break-out boards, UPS HAT and more!. Rapid, tool-free assembly - the highpi case sets the standard for ease of use and versatility in raspberry Pi cases.
| Brand | HiFiBerry #ad |
| Manufacturer | BuyaPi.ca #ad |
| Height | 1.57 Inches |
| Length | 3.94 Inches |
| Width | 2.76 Inches |
| Part Number | 9011 |
| Model | 9011 |
More information #ad
3. Geekworm
#adPi 4B Protective Acrylic Case for Raspberry Pi 4 Model B, Geekworm Raspberry Pi 4 Case, 3B, B+ and Raspberry Pi Hat Expansion Board, Raspberry Pi 3B+, Raspberry Pi Universal HAT Size Case DIY Kit, 2B
#adCompatible with raspberry pi 4 model b/ pi 3 model b+ / pi3 model b/ 2B / B+ and Pi Hat expansion board Like X706 UPS/X728 UPS.
More information #ad
It is a perfect acrylic case diy kit to install raspberry pi hat expansion board with Raspberry Pi 4 Model B/ Pi 3 Model B plus / 2B / Pi 3 Model B+/ Pi3 Model B / B+ mother board together. For the installation, please refer to Installation Guide in the product description.| Brand | Geekworm #ad |
| Manufacturer | Geekwrom #ad |
| Height | 2.36 Inches |
| Length | 3.62 Inches |
| Weight | 0.07 Pounds |
| Width | 0.24 Inches |
| Part Number | TB-2017-37 |
| Model | TB-471905 |
More information #ad
4. GeeekPi
#adGeeekPi Raspberry Pi 4 Metal Case,Raspberry Pi 4B Case for Raspberry Pi Low-Profile CPU Cooler,Raspberry Pi Case for RPi Horizontal ICE Tower Cooler Pi and Fan NOT Included
#adMore information #ad
Only for raspberry pi low-profile cpu cooler, please refer to asin b086ktmzlx;case with power supply, raspberry pi horizontal ice tower cooler, please refer to ASIN:B07ZV1LLWK;Case with Fan, please refer to ASIN:B09R1M9YCZ. Very easy to set up -only for Raspberry Pi 4 Model B.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | ZP-0087 |
| Model | ZP-0087 |
More information #ad
5. HiFiBerry
#adHiFiBerry DAC2 Pro
#adHiFiBerry #ad - Integrated headphone amplifier. You just plug it onto the raspberry Pi, it is conform to the Raspberry Pi hardware-attached-on-top HAT specification.More information #ad
No soldering, comes as a pre-fabricated kit. Compatible with all raspberry Pi models with a 40-pin GPIO connector. Stereo output. Connects directly to the Raspberry Pi, no additional cables needed.| Brand | HiFiBerry #ad |
| Manufacturer | HiFiBerry #ad |
| Weight | 0.04 Pounds |
| Part Number | DAC2 Pro |
| Model | DAC2 Pro |
More information #ad
6. HiFiBerry
#adHiFiBerry DAC+ ADC Pro
#adHiFiBerry #ad - We include 4 M2. 5x12mm spacers to fix the board onto the Raspberry Pi. Audio input might require Linux kernel update at least version 4. 19. 60 Gold plated RCA output connectors. Connects directly to the Raspberry Pi, no additional cables or additional power supply needed.More information #ad
Comes with all components required to mount it. You can control the input and output parameters using “alsamixer” or any application that supports ALSA mixer controls. Hardware volume control for dac and adc.| Brand | HiFiBerry #ad |
| Manufacturer | HiFiBerry #ad |
| Height | 50 Centimeters |
| Length | 100 Centimeters |
| Width | 100 Centimeters |
| Part Number | DAC+ ADC Pro |
More information #ad
7. HiFiBerry
#adHiFiBerry DIGI2 Pro
#adMore information #ad
| Brand | HiFiBerry #ad |
| Manufacturer | HifiBerry #ad |
| Height | 0.59 Inches |
| Length | 2.17 Inches |
| Weight | 0.08 Pounds |
| Width | 2.56 Inches |
| Part Number | 4260439550927 |
More information #ad
8. OONO
#adSemi-Enclosed Enclosure Kit for Raspberry Pi BeagleBone Arduino UNO Mega
#adPacking list: 2x covers, 8x m4x40mm standoffs, 16x m2. 5x6mm screws, must use m2x12mm spacers and M2x6mm screws, 4x m4x8mm screws, 8x M2.5x10mm spacers for arduino mkr module install, 4x M4x10mm spacers, but the kit not include these spacer and screws.
More information #ad
The material of the lower cover and upper cover is 1. 5mm thick aluminum plate, which is very strong, spacer/standoff and screws are nylon material. This is a multi-purpose semi-enclosed enclosure kit, supports raspberry pi 1 model a+ / beaglebone ai / pi 1 model b+ / uno r3 / beaglebone black / beaglebone black wireless / BeagleBone Green / mkr series etc, and beaglebone / Pi 2 Model B / Mega 2560 R2 / Pi Zero / pi 3 model b / Pi 3 Model B+ / pi 4 module b / pi zero w, arduino uno r2 / mega 2560 r3 / BeagleBone Green Wireless or SanCloud BeagleBone Enhanced. It can be assembled very flexibly as a semi-closed enclosure, or if you buy multiple sets, or as a two-layer bracket, it can be used as a Raspberry Pi cluster case.
| Brand | OONO #ad |
| Manufacturer | CZH-LABS #ad |
| Part Number | CASE-048-1 |
| Model | CASE-048-1 |
More information #ad
9. HiFiBerry
#adHiFiBerry DSP Add-On Module
#adHiFiBerry #ad - Enables the application of filters for room and/or speaker correction while still in the digital domain. Dsp add-on module for dac2 hd and DAC2 Pro supporting filter application in the digital domain.More information #ad
| Brand | HiFiBerry #ad |
| Manufacturer | HiFiBerry #ad |
| Part Number | HB-DSP-ADD |
More information #ad
10. innomaker
#adInnoMaker Raspberry Pi HiFi DAC HAT PCM5122 HiFi DAC Audio Card Expansion Board for Raspberry Pi 4 3 B+ Pi Zero etc. DAC HAT
#adConnects directly to the raspberry Pi board, Zero W, no additional cables required, 3B, Zero, no soldering. For more information, please refer to our wiki（view the link on color page comes with the goods.
More information #ad
Easy to get more beautiful and fantastic sound by this RPI+DAC HiFi suits. Support dsd over PCMDOP mode. On-board a pair of gold plated rca left &right jacks and a 3. 5mm high-end headphone jack output, allow you free to play your music through Raspberry Pi to another terminals. Comes with software, document and friendly technology support. Paired with stereo high fidelity headphone amplifier TPA6133. Absolutely perfect to support all raspberry pi music playback system, pimusicbox, max2play, Volumio, Debian, RuneAudio, Moode, OpenELEC, PiCorePlayer, like LibreElec, OSMC, Ubuntu etc.
| Brand | innomaker #ad |
| Manufacturer | innomaker #ad |
| Part Number | RPI-HIFI |
| Model | NA |
More information #ad
