As an Amazon Associate I earn from qualifying purchases.
Flexible installation and maintenance with this lightweight duplex small form factor LC to LC cable that is designed for high density network applications; Adjustable connector clips allow individual fiber access for quick reconfiguration or polarity reversal. Higher bandwidth and longer reach om4 zipcord fiber cord enhances the performance of your network by allowing for extended length channels, higher loss-budget margins, and greater configuration flexibility in the future; As your network upgrades to faster 10, 40 or 100 Gig speeds, this robust cable won't need to be replaced.
Multimode fiber duplex om4 50/125 micron fiber cable assembly with lc connectors is designed for 10gbase, 40GBASE, 100gBASE Gigabit applications in Storage Area Networks, data centers and more; OM4 LOMMF laser optimized multi-mode fiber rated for operation at 850 and 1350 nm with VCSEL laser network equipment.

Bend insensitive design of the lc to sc cable allows for a 7. 5mm bending radius that is 4x more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint; Bend insensitive multimode fiber BIMMF is interoperable with standard OM3 cabling systems.
Multimode fiber duplex om3 50/125 micron fiber cables with dual small form factor lc to legacy sc connectors are designed for 10 Gigabit applications in SAN networks and data centers; OM3 LOMMF laser optimized multi-mode fiber rated;? Connects to VCSEL laser network equipment such as SFP+ transceivers, media converters, Ethernet switches, industrial Ethernet devices, and optical fiber NIC's; Compatible with all multimode 50/125 micron fiber cabling.

2-pack. 1 meter om3 lc to lc multimode duplex fiber patch cable are widely used for 1g/10g/40g/100G Ethernet connections. Operating data rate up to 1.

2m fiber optic cable: rated om5, this 50/125 multimode fiber cable with Duplex LC connectors carries signals in 40/100 GB Ethernet networks. Features a lime green jacket for easy OM5 identification.
The cable has duplex male lc connectors on each end and Features a Low-Smoke zero-halogen LSZH jacket that limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.

10g sfp+ sr transceiver compatible for cisco sfp-10g-sr, ubiquiti uf-mm-10g, d-link, linksys, netgear, mikrotik, Meraki MA-SFP-10GB-SR, TP-Link, broadcom, QNAP, and Other open equipments.2

Flexible installation and maintenance with this lightweight duplex small form factor LC to LC cable that is designed for high density network applications; Adjustable connector clips allow individual fiber access for quick reconfiguration or polarity reversal. With the new swdm shortwave wavelength division multiplexing specs, OM5 WBMMF Wideband multi-mode fiber can operate between 850 and 953 nm wavelength to support multiple wavelengths over a single fiber channel, achieving increased bandwidth through reduced fiber counts.
Bend insensitive design allows for a 7. 5mm bending radius that is 4x more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint; Bend insensitive multimode fiber BIMMF is interoperable with standard OM5 cabling and backwards compatible with OM4 LOMMF.


1 meter om3 lc to lc multimode duplex fiber patch cable are widely used for 1g/10g/40g/100G Ethernet connections. Wide applicable to the 10 gigcabit ethernet, Storages, Server, Switches, Routers, network cards, and Other fiber optic equipments that with 10G SFP+ optical port.

High performance cat6 ethernet cable: 100% copper for error-free multi gigabit 1/2. 5/5gbps connections; 10gbps up to 160'; fluke patch cord tested to comply w/ANSI/TIA-568-2. D category 6; ETL Verified. Quality construction: etl & ul certified wire; 50-micron gold-plated connectors prevent rust/corrosion to avoid costly network downtime; High quality PVC jacket resists bending or fraying damage.

2-pack. Duplex lc connector: transceiver link multimode fiber patch cable, Data Rate is 10Gb/s. Distance up to 300m @50 / 125 um MMF, Wave Length is 850nm. Hot-pluggable: sfp+ sr transceiver module plug and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links.
1. Cable Matters
#ad
LC to LC Fiber Patch Cable 2m, Cable Matters 10Gb 40Gb OFNP Plenum Rated Multimode Duplex 50/125 OM4 Fiber Cable Fiber Optic Cable
#adCable Matters #ad - Standards compliant om4 cable includes a superior ofnp plenum safety fire rating that meets ul 910 regulations and substitutes for ofnR riser rated cable; TIA/EIA compliant cable has color-coded aqua jacket and straight-thru A to B wiring; OM4 rated cables operate with Gigabit Ethernet 10GBase-S, 100GBASE-SR10, 10, 40GBASE-SR4, and Fibre Channel 8, 16 GFC.Flexible installation and maintenance with this lightweight duplex small form factor LC to LC cable that is designed for high density network applications; Adjustable connector clips allow individual fiber access for quick reconfiguration or polarity reversal. Higher bandwidth and longer reach om4 zipcord fiber cord enhances the performance of your network by allowing for extended length channels, higher loss-budget margins, and greater configuration flexibility in the future; As your network upgrades to faster 10, 40 or 100 Gig speeds, this robust cable won't need to be replaced.
More information #ad
Bend insensitive design allows for a 7. 5mm bending radius that is 4x more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint; Bend insensitive multimode fiber BIMMF is interoperable with standard OM4 cabling and backwards compatible with OM3 LOMMF. Multimode fiber duplex om4 50/125 micron fiber cable assembly with lc connectors is designed for 10gbase, 40GBASE, 100gBASE Gigabit applications in Storage Area Networks, data centers and more; OM4 LOMMF laser optimized multi-mode fiber rated for operation at 850 and 1350 nm with VCSEL laser network equipment.
Brand | Cable Matters #ad |
Manufacturer | Cable Matters #ad |
Part Number | 120009-2m-N |
Model | 120009-2m-N |
More information #ad
2. Cable Matters
#ad
SC to LC Fiber Patch Cable 1m, Cable Matters 10Gb 40Gb OFNP Plenum Rated Multimode Duplex 50/125 OM3 Fiber Cable LC to SC Fiber Optic Cable
#adCable Matters #ad - Rapid installation with adjustable clips and dust caps that protect the fiber while allowing individual access; A/B position labels on the duplex clip and labeled tags provide quick identification when troubleshooting; Superior construction combines a 100% factory tested, slim-profile boots with cable strain relief, tight-buffered cable with a duplex 2. 0 x 4. 2mm zipcord design, lc and sc connectors in a protective yoke, and PC polish, and zirconia ceramic ferrules for precise alignment.Bend insensitive design of the lc to sc cable allows for a 7. 5mm bending radius that is 4x more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint; Bend insensitive multimode fiber BIMMF is interoperable with standard OM3 cabling systems.
More information #ad
Standards compliant om3 cable includes a superior ofnp plenum safty rating that substitutes for ofnr riser rated cable; tia/eia compliant color-coded aqua jacket has beige connectors and straight-thru A to B wiring; OM3 classification rating operates with Gigabit Ethernet 1000Base-LX, or 10GBase-S/LR4/LRM, 1000Base-SX, and Fibre Channel 100/200/400/1200-MX; Backwards compatible with FDDI, and Fast Ethernet 10/100BASE SX or FX. Multimode fiber duplex om3 50/125 micron fiber cables with dual small form factor lc to legacy sc connectors are designed for 10 Gigabit applications in SAN networks and data centers; OM3 LOMMF laser optimized multi-mode fiber rated;? Connects to VCSEL laser network equipment such as SFP+ transceivers, media converters, Ethernet switches, industrial Ethernet devices, and optical fiber NIC's; Compatible with all multimode 50/125 micron fiber cabling.
Brand | Cable Matters #ad |
Manufacturer | Cable Matters #ad |
Part Number | 120016-1m |
Model | 120016-1m |
More information #ad
3. H!Fiber.com
#ad
2 Pack of 1000Base-SX with 1meter OM3 LC to LC Fiber Patch Cable, SFP Multimode Module Compatible for Ubiquiti UF-MM-1G and More
#adH!Fiber.com #ad - Duplex lc connector link multimode fiber patch cord, reach 550m, wavelength is 850-nm, MMF. 1000base-sx compatible for ubiquiti uf-mm-1g, Netgear, intel, mikrotik, TP-Link, D-Link, Broadcom and Other Open Equipments.2-pack. 1 meter om3 lc to lc multimode duplex fiber patch cable are widely used for 1g/10g/40g/100G Ethernet connections. Operating data rate up to 1.
More information #ad
25gbps, network card, router, server, applicable to the switch, media converter and other equipments with gigabit SFP optical port. It can quickly find out the fault location of the optical fiber link with its DDM function, Easy to Install, Plug and Play. For example: compatible with 1000base-sx, 10Gbase-SR, 10Gbase-LRM and other SFP Multimode transceivers.Brand | H!Fiber.com #ad |
More information #ad
4. Tripp Lite
#ad
100GB, Tripp Lite LC to LC Multimode Duplex Fiber Optics Patch Cable, OM5, 50/125, 2 Meter N820-02M-OM5, LC/Male
#adTripp Lite #ad - Short two-meter length reduces cable clutter. Support higher bandwidths: for 40/100 gb speeds up to 300 meters at 850 nm. Certified & reliable: rated om5, the n820-02m-om5 cable is backward compatible with existing om3- and om4-rated 50/125 fiber solutions.2m fiber optic cable: rated om5, this 50/125 multimode fiber cable with Duplex LC connectors carries signals in 40/100 GB Ethernet networks. Features a lime green jacket for easy OM5 identification.
More information #ad
It is commonly used in lans, SANs and high-speed parallel interconnects for head-ends, central offices and data centers. Vcsel: the two meter fiber optics cable is a laser-optimized multimode fiber LOMMF cable designed for use with vertical-cavity surface-emitting lasers vcsels to offer a cost-effective, high-bandwidth solution over extended distances in the 850-950 nm wavelength range. The cable has duplex male lc connectors on each end and Features a Low-Smoke zero-halogen LSZH jacket that limits the amount of toxic smoke emitted in case of combustion, making it suitable for poorly ventilated areas.
Brand | Tripp Lite #ad |
Manufacturer | TRIPP LITE #ad |
Height | 0.5 Inches |
Length | 6.5 Inches |
Weight | 0.05 Pounds |
Width | 8 Inches |
Part Number | N820-02M-OM5 |
Model | N820-02M-OM5 |
Warranty | Lifetime limited warranty |
More information #ad
5. H!Fiber.com
#ad
SFP+ to LC Multimode Module Compatible for Cisco SFP-10G-SR, 2 Pack of 10G SFP+ SR Transceiver with 1meter OM3 LC to LC Fiber Patch Cable
#adH!Fiber.com #ad - 1 meter om3 lc to lc multimode duplex fiber patch cable are widely used for 1g/10g/40g/100G Ethernet connections. Wide applicable to the 10 gigcabit ethernet, Server, Switches, storages, Network cards, Routers, and Other fiber optic equipments that with 10G SFP+ optical port.10g sfp+ sr transceiver compatible for cisco sfp-10g-sr, ubiquiti uf-mm-10g, d-link, linksys, netgear, mikrotik, Meraki MA-SFP-10GB-SR, TP-Link, broadcom, QNAP, and Other open equipments.2
More information #ad
2-pack. Hot-pluggable sfp+ sr transceiver module, plug and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links. Duplex lc connector link multimode fiber patch cord, distance up to 300m @50 / 125 um MMF, Data Rate is 10Gb/s, Wave Length is 850nm. For example: compatible with 1000base-sx, 10Gbase-SR, 10Gbase-LRM and other SFP Multimode transceivers.Brand | H!Fiber.com #ad |
More information #ad
6. Cable Matters
#ad
LC to LC Fiber Patch Cable 2m, Cable Matters 40Gb 100Gb OFNP Plenum Rated Multimode Duplex 50/125 OM5 Fiber Cable Fiber Optic Cable
#adCable Matters #ad - Multimode fiber om5 50/125 micron fiber cable assembly is designed for the existing 40gbase and 100gbase applications and future 200gbase and 400GBASE applications in Storage Area Networks, and data centers. Om5 cable enhances the performance of your network by allowing for extended length channels, higher loss-budget margins, lower installation cost, and greater configuration flexibility.Flexible installation and maintenance with this lightweight duplex small form factor LC to LC cable that is designed for high density network applications; Adjustable connector clips allow individual fiber access for quick reconfiguration or polarity reversal. With the new swdm shortwave wavelength division multiplexing specs, OM5 WBMMF Wideband multi-mode fiber can operate between 850 and 953 nm wavelength to support multiple wavelengths over a single fiber channel, achieving increased bandwidth through reduced fiber counts.
More information #ad
As your network upgrades to faster 100 or 400 Gig speeds, this robust cable won't need to be replaced. The om5 zipcord fiber cord maintains 100% backwards compatibility with the 850 nm wavelength used by OM3/OM4. Standards compliant om5 cable includes a superior ofnp plenum safety fire rating that meets ul 910 regulations and substitutes for ofnr riser rated cable; TIA/EIA compliant cable has color-coded lime green jacket and straight-thru A to B wiring; OM5 rated cables operate with 10GBase-S, 100GBASE-SR4, 40GBASE-SR4, 100GBASE-SR10, 200GBASE-SR4, and 400GBASE-SR4. Bend insensitive design allows for a 7. 5mm bending radius that is 4x more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint; Bend insensitive multimode fiber BIMMF is interoperable with standard OM5 cabling and backwards compatible with OM4 LOMMF.
Brand | Cable Matters #ad |
Manufacturer | Cable Matters #ad |
Height | 0.39 Inches |
Length | 7.87 Inches |
Width | 6.69 Inches |
Part Number | 120019-2m |
Model | 120019-2m |
More information #ad
7. StarTech
#ad
LC/SC, OM2, LC to SC Fiber Patch Cable 50FIBLCSC3, LSZH, StarTech.com 3m Fiber Optic Cable, Multimode Duplex 50/125
#adStarTech #ad - Connect fiber network devices for high-speed transfers with LSZH rated cable. 3 meter duplex fiber cable / lc to sc / multimode patch cable / 3m Multimode 50/125 Duplex Fiber Optic Cable LC to SC.More information #ad
Om2 50/125 500mhz multimode fiber. Immune to electrical interference. Lszh low-smoke, Zero-Halogen cable jacket.Brand | StarTech #ad |
Manufacturer | STARTECH.COM #ad |
Height | 8.31 Inches |
Length | 7.83 Inches |
Weight | 0.05 Pounds |
Width | 0.28 Inches |
Part Number | 50FIBLCSC3 |
Model | 50FIBLCSC3 |
Warranty | Lifetime warranty |
More information #ad
8. H!Fiber.com
#ad
SFP+ to LC Multimode Module Compatible for Ubiquiti UF-MM-10G, 2 Pack of 10G SFP+ SR Transceiver with 1 Meter OM3 LC to LC Fiber Patch Cable
#adH!Fiber.com #ad - For example: compatible with 1000base-sx, 10Gbase-SR, 10Gbase-LRM and other SFP Multimode transceivers. Hot-pluggable sfp+ sr transceiver module, plug and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links.1 meter om3 lc to lc multimode duplex fiber patch cable are widely used for 1g/10g/40g/100G Ethernet connections. Wide applicable to the 10 gigcabit ethernet, Storages, Server, Switches, Routers, network cards, and Other fiber optic equipments that with 10G SFP+ optical port.
More information #ad
Duplex lc connector link multimode fiber patch cord, data Rate is 10Gb/s,Distance up to 300m @50 / 125 um MMF, Wave Length is 850nm. 10g sfp+ sr transceiver compatible for ubiquiti uf-mm-10g, D-Link, TP-Link, netgear, Mikrotik, Broadcom and Other Open Equipments.2-pack.Brand | H!Fiber.com #ad |
More information #ad
9. StarTech
#ad
LC to LC Fiber Patch Cable 50FIBLCLC5, StarTech.com 5m Fiber Optic Cable, OM2, LC/LC, Multimode Duplex 50/125, LSZH
#adStarTech #ad - Poe support: 24 awg stranded copper conductors & security systems; iEEE 802. 3bt & ul rated wiring supports up to 100W for PoE devices like VOIP phone & DTE power compliance reduces cable heating.High performance cat6 ethernet cable: 100% copper for error-free multi gigabit 1/2. 5/5gbps connections; 10gbps up to 160'; fluke patch cord tested to comply w/ANSI/TIA-568-2. D category 6; ETL Verified. Quality construction: etl & ul certified wire; 50-micron gold-plated connectors prevent rust/corrosion to avoid costly network downtime; High quality PVC jacket resists bending or fraying damage.
More information #ad
Easy installation: 20 foot molded patch cord is easy to connect into high density panels with many cables; Compatible w/Cat5e; Available w/Snagless boots for easy wiring conduit installation. Compatible devices: Network Device.Brand | StarTech #ad |
Manufacturer | STARTECH.COM #ad |
Height | 0.01 Inches |
Length | 240.1 Inches |
Weight | 0.59 Pounds |
Width | 0.01 Inches |
Part Number | C6PATCH20GR |
Model | C6PATCH20GR |
Warranty | Lifetime |
More information #ad
10. H!Fiber.com
#ad
SFP+ to LC Multimode Transceiver Compatible for Cisco SFP-10G-SR and More, 2 Pack of 10Gbase-SR Module with 2 Meter OM3 LC to LC Fiber Patch Cable
#adH!Fiber.com #ad - For example: compatible with 1000base-sx, 10Gbase-SR, 10Gbase-LRM and other SFP Multimode transceivers. 10gbase-sr module: compatible for cisco sfp-10g-sr, QNAP, Ubiquiti, linksys, TP-Link, d-link, Broadcom, netgear, Meraki, Mikrotik, and Other open equipments.2-pack. Duplex lc connector: transceiver link multimode fiber patch cable, Data Rate is 10Gb/s. Distance up to 300m @50 / 125 um MMF, Wave Length is 850nm. Hot-pluggable: sfp+ sr transceiver module plug and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links.
More information #ad
2 meter cable: om3 lc to lc multimode fiber patch cable are widely used for 1g/10g/40g/100g Ethernet connections. Wide applicable: used in the 10 gigcabit ethernet, Server, Switches, Storages, Network cards, Routers, and Other fiber optic equipments that with 10G SFP+ optical port.Brand | H!Fiber.com #ad |
More information #ad