As an Amazon Associate I earn from qualifying purchases.
shamjina #ad - Heavy duty spdt relays and sockets, normally closed,. 12 volt 40 amp 4-prong relays. Relays and sockets are used for many car electronic applications to turn on/off almost any device.
Huayao #ad - Relay output maximum contact is AC250V 10A and DC30V 10A. It is also able to control various appliances and other equipments with large current. Working status indicator lights are conducive to the safe use. 4-channel relay interface board, plc, arm, pic, which can be controlled directly by a wide range of microcontrollers such as AVR, etc.
AOICRIE #ad - Has screw terminals for relay NC, NO and for input; Coil +, C, coil - and trigger. Can be selected by jumper relay and TTL or ground. This relay board maximum load: ac 250v/10a, dc 30v/10a with power and relay action indicator.
Each relay has normally open and normally closed contact. Wide application these 12v relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc. Using smd optocoupler isolation, the relay will not operate; And interface design humanized, stable performance.
These relay board use photocoupler isolation that has strong driving ability and stable performance. The isolation circuit prevent damages to I / O port by relay switch current. The module has a jumper so you can set rather the unit state changes with high or low signal. Main specification peak load of no connector: ac 250v/10a, dc 30V/10A; Trigger Current: 5mA; The Module Operating Voltage:12V.
Huayao #ad - Can be selected by jumper relay and TTL or ground. Each relay has normally open and normally closed contact. With power indicator, 8-way road has a status indicator. 5v 8-channel relay interface board, each one needs 15-20mA Driver Current;Relay output maximum contact is AC250V 10A and DC30V 10A.
AITRIP #ad - High level triggerthe relay module is triggered by high level signal, which can be input from microcontroller IO. 30vdc 250vac load equiped with high-current relay, ac250v 10a ; dc30v 10A, each relay has normally open and normally closed contact.
Can be selected by jumper relay and TTL or ground. 3v/3. 3v power relay module- this relay board provides a single relay that can be controlled by any 3V/3.
NOYITO #ad - Noyito 8-channel micro usb relay module aSIN：B09RGTSHHW. Onboard high performance microcontroller chip, can work 100, ch340 usb control chip.
With power led indicator and relay status LED. On-board 2-channel 5v, 10a/30vdc relay, 10a/250VAC, long relay life, 000 times continuously. Br>. Br>. Module with overcurrent protection and relay diode freewheel protection.
FainWan #ad - Widely used for all mcu control, PLC control, industrial sector, smart home control. Standard interface that can be controlled directly by microcontroller 8051, DSP, MSP430, AVR, ARM, PIC, ARM, TTL logic. Can be selected by jumper relay and TTL or ground.
NOYITO #ad - Module working voltage:: dc 10-16v 12v version dc18-28v dc24v version "note: The 24V pulse charger may have more than 30V pulse voltage and cannot be used as the power supply for this relay board.
". Br>. Module working current: standby average 16mA/12V, relay pull-in 45mA/12V, digital tube off standby current 6mA/12V;.
uxcell #ad - Wire specifications: black-power inputpin 30, when 85 and 86 connect the power, red-normally open outputpin 87. It is recommended to confirm the model, appearance, and function before placing an order.
85 and 86 are the relay coil ends, the light will be on; when the positive is not connected to the power, 30 and 87 are the normally open contact terminals of the relay, 30 and 87 will be connected.
ZOOZ #ad - It comes with s2 authenticated security and SmartStart for easy pairing. Automate anything: add z-wave connectivity to up / down dc motors in screens, motorized blinds, commercial gates, gas fireplace, doorbell, or awnings. Connect an optional wall switch for physical on/off control or use your Z-Wave hub required, sold separately for wireless control.
Remembers and restores on/off status after power failure. This product is noT supported by Wink or Z-Wave alarm panels. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel.
Quick installation: power it with a 12-24 v ac/dc power source or a standard USB C cable included and a power supply sold separately. Jumper wires NOT included. 2 smart inputs: monitor 12-24 v or dry contact inputs separately from the dry contact outputs. Built-in auto-on and auto-off timer available if your hub supports advanced settings. Your smart speaker is NOT a Z-Wave hub. The device is etl certified and conforms with North American safety standards. Wall-mount ready.
1. shamjina
#adShamjina Car Vehicle 12V Volt 40A AMP Relay & Socket SPDT 4Pin 4Wire Normally Closed
#adMore information #ad
High 40a coil capacity- able to handle those high current applications with ease. They are also used when a device draws heavy amperage such as car alarms, trunk releases strobe lights, stereos, headlights, doors, remote starts, fans, air horns, fog lights, and much more.| Brand | shamjina #ad |
| Manufacturer | shamjina #ad |
| Height | 7.87 Inches |
| Length | 5.3 Inches |
| Width | 0.28 Inches |
| Part Number | GJxHlyI6600Bnfgc |
| Model | GJxHlyI6600Bnfgc |
More information #ad
2. Huayao
#adHuayao 2pcs 4 Channel DC 5V Relay Module with Optocoupler for UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
#adMore information #ad
This relay module is 5v active low. Widely used for all mcu control, PLC control, industrial sector, smart home control. Standard interface can be directly connected with microcontrollers.| Brand | Huayao #ad |
| Manufacturer | Huayao #ad |
| Weight | 0.1 Pounds |
| Part Number | NA |
| Model | NA |
More information #ad
3. AOICRIE
#adAOICRIE 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger
#adEach relay has normally open and normally closed contact. Wide application these 12v relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4 etc. Using smd optocoupler isolation, the relay will not operate; And interface design humanized, stable performance.
More information #ad
Fault tolerant design, all the interface can be directly connected through the terminal lead, even if the control line is broken, strong driving capability, so convenient. These relay board use photocoupler isolation that has strong driving ability and stable performance. The isolation circuit prevent damages to I / O port by relay switch current. The module has a jumper so you can set rather the unit state changes with high or low signal. Main specification peak load of no connector: ac 250v/10a, dc 30V/10A; Trigger Current: 5mA; The Module Operating Voltage:12V.
| Brand | AOICRIE #ad |
| Manufacturer | AOICRIE #ad |
| Part Number | Aoicrie |
More information #ad
4. Huayao
#adHuayao 2pcs 8 Channel DC 5V Relay Module with Optocoupler for UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
#adMore information #ad
Standard interface that can be controlled directly by microcontroller 8051, ARM, PIC, DSP, MSP430, ARM, AVR, TTL logic. Widely used for all mcu control, industrial sector, PLC control, smart home control. With a relay coil to absorb the diode protection.| Brand | Huayao #ad |
| Manufacturer | Huayao #ad |
| Part Number | HY027 |
More information #ad
5. AITRIP
#adAITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board
#adCan be selected by jumper relay and TTL or ground. 3v/3. 3v power relay module- this relay board provides a single relay that can be controlled by any 3V/3.
More information #ad
3v digital input from your microcontroller IO. Wide application- these 3v relay board works well with arm /pic /avR /MCU/Raspberry/CNC machine/ PS4/3. 3v /nodemcu/ esp8266 module etc. Long life - fast response time less than 20ms and long lifetime up to 100, 000 times snap action with diode freewheel protection.| Brand | AITRIP #ad |
| Manufacturer | AITRIP #ad |
| Part Number | EC14323 |
More information #ad
6. NOYITO
#adNOYITO 2-Channel Micro USB Relay Module USB Smart Control Switch USB Intelligent Control Switch 2-Channel Micro USB
#adWith power led indicator and relay status LED. On-board 2-channel 5v, 10a/30vdc relay, 10a/250VAC, long relay life, 000 times continuously. Br>. Br>. Module with overcurrent protection and relay diode freewheel protection.
More information #ad
Br>. Noyito 2-channel micro usb relay module is equipped with a stable usb to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay. Noyito 4-channel micro usb relay module aSIN：B09RGVQXXT.| Brand | NOYITO #ad |
| Manufacturer | NOYITO #ad |
| Height | 0.59 Inches |
| Length | 1.97 Inches |
| Width | 1.57 Inches |
More information #ad
7. FainWan
#adFainWan 2pcs 8 Channel DC 5V Relay Module with Optocoupler for UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Rasp-Berry Pi
#adMore information #ad
With power indicator, 8-way road has a status indicator. With a relay coil to absorb the diode protection. 5v 8-channel relay interface board, each one needs 15-20mA Driver Current;Relay output maximum contact is AC250V 10A and DC30V 10A. Each relay has normally open and normally closed contact.| Brand | FainWan #ad |
| Manufacturer | FainWan #ad |
| Part Number | 5V8Channel-2pcs |
| Warranty | one year |
More information #ad
8. NOYITO
#adNOYITO Voltage Relay Module Upper Lower Limit Detection Control Switch Off ON Over Voltage Protection Battery Charge Discharge Timing 24V
#ad". Br>. Module working current: standby average 16mA/12V, relay pull-in 45mA/12V, digital tube off standby current 6mA/12V;.
More information #ad
Voltage detection display range: 0 - 99. 9v; voltage detection error: ±01v;. Relay load: 10a / 277vac 10a / 30 dC Max . Relay parameters: a set of conversion normally open normally closed point, contact load: 10A/277VAC 10A/30 DC NOTE： the maximum DC load 30V 10A maximum load current is 1A at 50V DC voltage. Br>.| Brand | NOYITO #ad |
| Manufacturer | NOYITO #ad |
| Part Number | 8541673133 |
| Model | 8541673133 |
| Warranty | NOYITO Voltage Relay Module User Manual Download Link: https://www.amazon.com/clouddrive/share/NnV0KFDOz3h0G6QrNO9GktKOfHWh74BguzrXMyO0nJM |
More information #ad
9. uxcell
#adUxcell JD-2912 4 Pin DC 36V 40A Universal Car Vehicle Motor Fuse Relay Switch Power with Harness
#ad85 and 86 are the relay coil ends, the light will be on; when the positive is not connected to the power, 30 and 87 are the normally open contact terminals of the relay, 30 and 87 will be connected.
More information #ad
When the positive is connected to the power, White-PositivePin 85, Yellow-NegativePin 86, the indicator light will be off. Pin number: 4; current: 40A; Voltage: DC 36V. Made of metal and plastic, durable materials for long time service. Make sure this is the correct relay replacement your car need before purchase. Suitable for cars and motorcycles.| Brand | uxcell #ad |
| Manufacturer | uxcell #ad |
| Part Number | a19031900ux0057 |
More information #ad
10. ZOOZ
#adGarage Doors, Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Sprinklers, and More | 2 NO-C-NC Relays 20A, 10A | Signal Repeater | Hub Required Compatible with SmartThings and Hubitat
#adRemembers and restores on/off status after power failure. This product is noT supported by Wink or Z-Wave alarm panels. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel.
More information #ad
Do not power with 110 v! new 700 z-wave: enjoy better signal coverage and a stronger z-wave repeater for your mesh network with the latest 700 series chip. Quick installation: power it with a 12-24 v ac/dc power source or a standard USB C cable included and a power supply sold separately. Jumper wires NOT included. 2 smart inputs: monitor 12-24 v or dry contact inputs separately from the dry contact outputs. Built-in auto-on and auto-off timer available if your hub supports advanced settings. Your smart speaker is NOT a Z-Wave hub. The device is etl certified and conforms with North American safety standards. Wall-mount ready.
| Brand | ZOOZ #ad |
| Manufacturer | Zooz #ad |
| Height | 3.5 Inches |
| Length | 2 Inches |
| Width | 5 Inches |
| Model | ZEN17 |
| Warranty | 12-month manufacturer warranty. |
More information #ad
