As an Amazon Associate I earn from qualifying purchases.
Sharkoon #ad - Revolutionary case design apart from a side panel made of tempered glass, a rarity in pc case design, the most special highlight is the revolutionary case design with a new look and feel. Here, the cables are held together with a cable clip and LED to the outside of the case via a cable pass-through. We shifted the tempered glass side panel to the right side, The Rev200 also has a minimalistic front panel which is reminiscent of a crystal.
The top panel has a magnetic cover for easy access to the cable compartment and to protect from dirt and dust. An airflow which comes to the point thanks to this new type of case design, the Rev200 not only has three addressable RGB fans behind the front panel, but there are also two identical fans in the rear of the case.
The pre-installed RGB controller provides a uniform illumination in 16. 8 million colours for all five fans as well as three more optional LED components. Tidy cable management apart from several cable pass-through, there is also a spacious cable compartment in the top of the case for the external mainboard and card connections, providing an organized cable management. Crystal-clear illumination to ensure that the case’s illumination shines to its fullest Effect, The Rev200 is equipped with an especially elegant side panel made of tempered glass, which has no visible screws when viewed directly from its side.
Sharkoon #ad - The fan tray can be removed together with the fans, facilitating the installation of a radiator up to 360 mm in length. The rubberized contact points and aerodynamic fan blades sustain both a strong and a quiet airflow. Unique and easy radiator installation for just a radiator, without fans, for the first time, the front of the case offers considerable room with an installation height up to 5.
2 cm. If more airflow is needed, an additional three 120 mm fans or two 140 mm fans can be installed to the top of the case. What sets them apart is their new modular frame design which has no visible screws. Strong airflow the tg6 rgb has three pre-installed 120 mm addressable rgb fans behind the front panel and another on the rear panel.
Using the built-in 8-port rgb controller, The fan lighting can be customized together with up to four additional LED components. This is due, to the three pre-installed front fans being secured to the front of the chassis and operating directly between the front panel and fan tray. This can be done through the software of a compatible main board which has a header with the pin out 5v-d-coded-g or 5v-d-g. For a more elegant appearance and enhanced protection of the glass, with the power supply, The side panel has been designed without any visible screws or bolts.
Sharkoon #ad - The hardware at a glance: the vg7-W is equipped with a large acrylic window on one side through which you can show your built-in hardware. The many playful design elements, especially the LEDs arranged like eyes in the upper part of the front panel, which especially gamers appreciate.
Powerful and playful: thanks to the breathable mesh grille in the front panel of the VG7-W, also provide an expressive character, increased air intake and thus excellent airflow is achieved.
No bite dust: so that the built-in hardware is optimally protected, the VG7-W has a removable and therefore easy to clean dust filter on all aerial intake areas. Optimised fan configuration: the vg7-w is best suited for air-cooled systems. This is why two 120 mm fans are already installed in the front and a 120 mm fan in the back.
Sharkoon #ad - So graphics cards up to 37. 5 cm in length fit into the tg4m rgb as CPU coolers up to 16 cm in height and power supplies up to 26. 5 cm in length. All hard drives are quickly and easily mounted on the base of the case using screw holes in the motherboard tray as well as the hard drive cage.
Three 120 mm rgb fans on the front and one on the back ensure proper cooling. So that the tg4m rgb does not get dirty, there is a removable dust filter on the side behind the front fan. Uncompromisingly compact: the housing design of the tg4m rgb does not only do unnecessary on the outside.
Cool features: the breathable mesh front allows constant ventilation of the entire case. It is deliberately designed as compact as possible, ensuring that there is enough space for standard hardware. Clean and tidy: numerous cable outlets in the motherboard tray ensure that cables simply disappear from view. Fully visible hardware: the black mesh front and the tempered glass side panel give the TG4M RGB its stylish gaming look, where the hardware can be admired like in a display case.
Corsair #ad - Combining innovative cable management, and proven CORSAIR build quality, concentrated airflow, the 4000D is a fitting choice for an immaculate high-performance PC.
A spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof dependent on RAM height. Put modern connections within easy reach with a front I/O panel including a USB 3.
MUSETEX #ad - At the same time, there are exclusive LED buttons to freely control your ARGB color light. Ultimate thermal performance - the computer case with tempered glass side panel possessing magnetic buckle and metal pull ring is easy to install the hardware, improving the ultimate thermal effect, and can be opened at any time, which improves 76% of the cooling effect than the non-opening panel case.
Only when the 5v3pin cable on the control board is connected to the motherboard can the ARGB light synchronization be realized.
After installing the radiator, the original 2 fans at the top can be installed at the above the power supply compartment to achieve more powerful cooling effect. And the radiator can be connected to the ARGB controller through 5V 3PIN to achieve 6 fans sync color. It is the best choice for you to create a high-end gaming desktop. More storage space - the mid tower pc case provides multiple hard drive fixed slots, supporting to install 4*SSD + 2*HDD or 5*SSD + 1*HDD.
MUSETEX #ad - Multiple argb modes button control has 19 lighting modes ;motherboard control: it connected to the 5V 3PIN header on motherboard, the motherboard control can be unlimited ARGB fans modes Note: 12V 4PIN motherboard is not suitable for motherboard control mode, it is recommended to use button control only.
Outstanding airflow6pcs 120mm musetex argb fans are pre-install for the case, which to provide gorgeous lighting than only inner or outer rings, the biggest feature of G05D6 is that it has fans with both inner and outer rings, proving excellent airflow to keep cooling with the case.
More space musetex g05 series has 2pcs 4mm-thick tempered glass full-view side panels. Top i/o panel1 x usb3. 0 port, 1 x hd audio, rgb button, 2 x USB2.0 port, Power/Reset. The internal space is wide and easy to install atx/micro atx/itx motherboard；120mm/240mm/360mm water cooling;maximum length 380mm GPU;maximum length 160mm CPU air cooling；maximum length 245mm PSU removable hard disk holders can be realized.
MUSETEX #ad - The side and front high transparent glass will help you build the coolest computer chassis. 6 argb fans - the musetex s6-b pc case comes pre-installed with 6 argb fans, more fans than most pc cases, providing better cooling performance and cooler colors. Even more amazing is that the lights of different components such as fans and radiator are sync.
1. Led button control: 19 lighting modes for LED button on the I/O panel; 2. Motherboard control: only when the 5V3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized.
Meanwhile, the control board reserves 2 additional 5V 3PIN interfaces that can be connected to your radiator. Note: 12v 4pin motherboard is not suitable for motherboard control, Button control is recommended. Show off your lights - s6-b with stylish tempered glass design showcases your PC components and ARGB lighting. The more powerful ARGB comes in 16.
GIM #ad - Our usb cable is shielded wire so that you can transmit data without interference. Top i/o panelgim mid-tower atx pc case designed with 1 x usb 3. 0 port, power, 2 x usb 2. 0 port, led button, 1 x HD Audio, Reset. The internal space is wide and easy to install 3 x 2.
5" ssd ；2 x 3. 5" hdd；atx/micro atx/itx motherboard;10*120mm argb fan, and the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, maximum length 400mm GPU, 240 and 120 mm. Mid tower gaming pc case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case.
Powerful cooling systemmid-tower computer case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent airflow at the same time, keep cooling. Super cable management: a big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve airflow. More spacegim mid-tower chassis has 2pcs 4mm-thick tempered glass full-view side panels. And gim pc case supports, atx, Micro-ATX and Mini-ITX motherboards.
NZXT #ad - Motherboard support: mini-ITX, MicroATX, and ATX. New features: front i/o usb type-C Port and Tempered glass side panel with single screw installation. Enhanced cable management: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
1. Sharkoon
#adSharkoon Rev200 RGB PC Case Black Mid Tower
#adThe top panel has a magnetic cover for easy access to the cable compartment and to protect from dirt and dust. An airflow which comes to the point thanks to this new type of case design, the Rev200 not only has three addressable RGB fans behind the front panel, but there are also two identical fans in the rear of the case.
More information #ad
However, which allows the user to position their case on the left side of their Desktop and still showcase the beautiful inner components. This allows air to flow directly onto the graphics card and be effectively transported through the back of the case. The pre-installed RGB controller provides a uniform illumination in 16. 8 million colours for all five fans as well as three more optional LED components. Tidy cable management apart from several cable pass-through, there is also a spacious cable compartment in the top of the case for the external mainboard and card connections, providing an organized cable management. Crystal-clear illumination to ensure that the case’s illumination shines to its fullest Effect, The Rev200 is equipped with an especially elegant side panel made of tempered glass, which has no visible screws when viewed directly from its side.
| Brand | Sharkoon #ad |
| Manufacturer | Sharkoon #ad |
| Height | 19.09 Inches |
| Length | 19.06 Inches |
| Weight | 19.84 Pounds |
| Width | 8.46 Inches |
| Part Number | 4044951028498 |
| Model | 4044951028498 |
More information #ad
2. Sharkoon
#adATX PC case, Sharkoon TG6 RGB
#ad2 cm. If more airflow is needed, an additional three 120 mm fans or two 140 mm fans can be installed to the top of the case. What sets them apart is their new modular frame design which has no visible screws. Strong airflow the tg6 rgb has three pre-installed 120 mm addressable rgb fans behind the front panel and another on the rear panel.
More information #ad
Multi-layered illumination for multilayered lighting within the entire rgb spectrum, each preinstalled fan is surrounded by three layers of addressable RGB LEDs. As clear as glass the hardware is viewable through the tempered glass front and side panels, HDDs and cabling disappearing within the power supply tunnel or behind the mainboard tray. Using the built-in 8-port rgb controller, The fan lighting can be customized together with up to four additional LED components. This is due, to the three pre-installed front fans being secured to the front of the chassis and operating directly between the front panel and fan tray. This can be done through the software of a compatible main board which has a header with the pin out 5v-d-coded-g or 5v-d-g. For a more elegant appearance and enhanced protection of the glass, with the power supply, The side panel has been designed without any visible screws or bolts.
| Brand | Sharkoon #ad |
| Manufacturer | Sharkoon #ad |
| Height | 18.31 Inches |
| Length | 17.8 Inches |
| Weight | 17.86 Pounds |
| Width | 8.46 Inches |
| Part Number | 4044951028221 |
| Model | 4044951028221 |
More information #ad
3. Sharkoon
#adSharkoon VG7-W Red PC Case
#adPowerful and playful: thanks to the breathable mesh grille in the front panel of the VG7-W, also provide an expressive character, increased air intake and thus excellent airflow is achieved.
More information #ad
The filter in front of the front fans can also be removed for a changed lighting mood. Compact housing design: the case is kept as compact as possible without compromising on hardware compatibility. No bite dust: so that the built-in hardware is optimally protected, the VG7-W has a removable and therefore easy to clean dust filter on all aerial intake areas. Optimised fan configuration: the vg7-w is best suited for air-cooled systems. This is why two 120 mm fans are already installed in the front and a 120 mm fan in the back.
| Brand | Sharkoon #ad |
| Manufacturer | Sharkoon Technologies GmbH #ad |
| Height | 16.93 Inches |
| Length | 18.11 Inches |
| Weight | 8.16 Pounds |
| Width | 7.87 Inches |
| Part Number | 4044951026838 |
| Model | 4044951026838 |
More information #ad
4. Sharkoon
#adPC case,Black, Sharkoon TG4M RGB
#adThree 120 mm rgb fans on the front and one on the back ensure proper cooling. So that the tg4m rgb does not get dirty, there is a removable dust filter on the side behind the front fan. Uncompromisingly compact: the housing design of the tg4m rgb does not only do unnecessary on the outside.
More information #ad
Plenty of storage space: the tg4m rgb offers numerous installation options for drives. This allows up to two 3. 5 inch drives and up to four SSDs to be installed. The led fans also ensure atmospheric illumination of the built-in components. Cool features: the breathable mesh front allows constant ventilation of the entire case. It is deliberately designed as compact as possible, ensuring that there is enough space for standard hardware. Clean and tidy: numerous cable outlets in the motherboard tray ensure that cables simply disappear from view. Fully visible hardware: the black mesh front and the tempered glass side panel give the TG4M RGB its stylish gaming look, where the hardware can be admired like in a display case.
| Brand | Sharkoon #ad |
| Manufacturer | Sharkoon Technologies GmbH #ad |
| Height | 16.93 Inches |
| Length | 17.91 Inches |
| Weight | 11.02 Pounds |
| Width | 7.87 Inches |
| Part Number | 4044951034840 |
| Model | 4044951034840 |
More information #ad
5. Corsair
#adBlack, Corsair 4000D Airflow Tempered Glass Mid-Tower ATX PC Case
#adA spacious interior fits up to 6x 120mm or 4x 140mm cooling fans, along with multiple radiators including 360mm in front and 280mm in the roof dependent on RAM height. Put modern connections within easy reach with a front I/O panel including a USB 3.
More information #ad
1 type-c port, USB 3. 0 port, and a combination audio/microphone jack. Includes two corsair 120mm airGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. The corsair rapidroute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.| Brand | Corsair #ad |
| Manufacturer | Corsair #ad |
| Height | 18.35 Inches |
| Length | 17.83 Inches |
| Weight | 17.2 Pounds |
| Width | 9.06 Inches |
| Part Number | CC-9011200-WW |
| Model | CC-9011200-WW |
| Warranty | 2 year manufacturer |
More information #ad
6. MUSETEX
#adMUSETEX Mid-Tower ATX PC Case with 6pcs 120mm ARGB Fans, USB 3.0 x 2, Black, TW8-S6-B, Opening Tempered Glass Side Panels, Mesh Computer Gaming Case
#adOnly when the 5v3pin cable on the control board is connected to the motherboard can the ARGB light synchronization be realized.
More information #ad
Compatible with different radiator - the top of the pc case is designed to fit 240mm / 280mm radiators. Powerful i/o panel - tw8's i/o panel includes 2 usb 3. 0 ports for faster transfer speed. Note: 12v 4pin motherboard is not suitable for motherboard control, Button control is recommended. After installing the radiator, the original 2 fans at the top can be installed at the above the power supply compartment to achieve more powerful cooling effect. And the radiator can be connected to the ARGB controller through 5V 3PIN to achieve 6 fans sync color. It is the best choice for you to create a high-end gaming desktop. More storage space - the mid tower pc case provides multiple hard drive fixed slots, supporting to install 4*SSD + 2*HDD or 5*SSD + 1*HDD.
| Brand | MUSETEX #ad |
| Manufacturer | MUSETEX #ad |
| Height | 18.98 Inches |
| Length | 15.94 Inches |
| Width | 8.07 Inches |
| Part Number | TW8-S6-B |
| Model | TW8-S6-B |
More information #ad
7. MUSETEX
#adMUSETEX 6 RGB LED Dual Fans 2 Translucent Tempered Glass Panel USB 3.0 Port,ATX Mid-Tower PC Gaming Case Cable Management/Airflow,Gaming PC Case
#adOutstanding airflow6pcs 120mm musetex argb fans are pre-install for the case, which to provide gorgeous lighting than only inner or outer rings, the biggest feature of G05D6 is that it has fans with both inner and outer rings, proving excellent airflow to keep cooling with the case.
More information #ad
Dust-proof design the case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case ; other is PSU dust filter easy for install and cleaning on the bottom. More space musetex g05 series has 2pcs 4mm-thick tempered glass full-view side panels. Top i/o panel1 x usb3. 0 port, 1 x hd audio, rgb button, 2 x USB2.0 port, Power/Reset. The internal space is wide and easy to install atx/micro atx/itx motherboard；120mm/240mm/360mm water cooling;maximum length 380mm GPU;maximum length 160mm CPU air cooling；maximum length 245mm PSU removable hard disk holders can be realized.
| Brand | MUSETEX #ad |
| Manufacturer | MUSETEX #ad |
| Height | 17.13 Inches |
| Length | 15.75 Inches |
| Weight | 17.5 Pounds |
| Width | 7.91 Inches |
| Part Number | G05D6-HB |
| Model | G05D6-HB |
| Warranty | 5 years warranty |
More information #ad
8. MUSETEX
#adMetal Honeycomb Mesh, MUSETEX ATX PC Case Mid-Tower with 6pcs 120mm ARGB Fans, S6-B, Computer Gaming Case with Tempered Glass Side & Front Panels, USB3.0
#ad1. Led button control: 19 lighting modes for LED button on the I/O panel; 2. Motherboard control: only when the 5V3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized.
More information #ad
More color and fun can be to play with than normal RGB! Brilliant customizable lighting - addressable argb leds controlled with 2 methods. Well-engineered airflow - musetex gaming pc case s6-b are pre-installed 6 pcs 120mm ARGB fans to provide lighting, utilizing anti-vortex vanes to ensure proper airflow inside the case to achieve better cooling performance than ordinary PC case. Meanwhile, the control board reserves 2 additional 5V 3PIN interfaces that can be connected to your radiator. Note: 12v 4pin motherboard is not suitable for motherboard control, Button control is recommended. Show off your lights - s6-b with stylish tempered glass design showcases your PC components and ARGB lighting. The more powerful ARGB comes in 16.
| Brand | MUSETEX #ad |
| Manufacturer | MUSETEX #ad |
| Height | 17.5 Inches |
| Length | 15.6 Inches |
| Weight | 15 Pounds |
| Width | 8.15 Inches |
| Part Number | G05S6-HB |
| Model | G06S6-B |
| Warranty | 10 years warranty |
More information #ad
9. GIM
#adWater-Cooling Ready, Magnet Dust Filter, GIM ATX Mid-Tower Case White Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port
#ad5" ssd ；2 x 3. 5" hdd；atx/micro atx/itx motherboard;10*120mm argb fan, and the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, maximum length 400mm GPU, 240 and 120 mm. Mid tower gaming pc case is equipped with 2pcs dust filter, and the top magnetic strip dust filter protects the case.
More information #ad
We will try our best to help you! GIM strives to bring the best customer service! No risk to purchase: any quality issue with your case, please feel free to contact us and let us know. Powerful cooling systemmid-tower computer case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent airflow at the same time, keep cooling. Super cable management: a big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve airflow. More spacegim mid-tower chassis has 2pcs 4mm-thick tempered glass full-view side panels. And gim pc case supports, atx, Micro-ATX and Mini-ITX motherboards.
| Brand | GIM #ad |
| Manufacturer | GIM #ad |
More information #ad
10. NZXT
#adTempered Glass Side Panel, Cable Management System, Front I/O USB Type-C Port, CA-H510B-W1, Water-Cooling Ready, Compact ATX Mid-Tower PC Gaming Case, NZXT H510, White/Black
#adMore information #ad
Streamlined cooling: 2 aer f120mm fans included for optimal internal airflow and the front panel and PSU intakes include removable filters, removable bracket designed for radiators up to 240mm - simplifies the installation of either closed-loop or custom-loop water cooling.| Brand | NZXT #ad |
| Manufacturer | NZXT #ad |
| Height | 18.11 Inches |
| Length | 16.85 Inches |
| Weight | 17.2 Pounds |
| Width | 8.27 Inches |
| Part Number | CA-H510B-W1 |
| Model | CA-H510B-W1 |
| Warranty | 2 years |
More information #ad
